Some work on the inside done

In between coats of paint, I kept finding a bit of time to carry on working on the inside of the boat as well.
I’ve finally cut out the beam that ran right across the observation pod (after bumping my head on it at least 100 times). Don’t worry, the deck is stable enough even without that section; it’s actually according to the plans.

Instead of the beam, I’ve glued in some handholds. I simply used two broomsticks for this.

Now it’s finally time to add a bit of color to the interior too!

Published
Categorized as Allgemein

Keel

I didn’t make the keel myself. Time was short, and besides, I have too little space in my workshop. Fortunately I was able to team up with the three other builders I had already worked with to cast the lead bulbs. Working together saves a lot of time and money.
We had the metalwork done by a local contractor.
The keel consists of two steel plates, one vertical, one horizontal. A profile was milled onto the front and back of the vertical plate.

After that, the two plates were assembled and welded together. A minimum weld thickness had to be achieved.

The weight was as expected.

Once the keels had been galvanized, we were able to pick them up. My keel went straight to Fabian, who finished both of our keels in parallel. I’m very grateful for his help!

Another picture of the weld:

The lead bulbs were still too heavy. Fabian milled down the inside until the weight was correct.

Three holes were drilled into each half. These are used to bolt the bulbs to the steel plate.
They also received an initial coat of epoxy.
Handling the bulbs throughout the process was very strenuous; each piece weighed 80kg at the start…

In addition to being bolted, the bulb halves are bonded to the steel plate.

Fabian then filled the drill holes with filler and faired the transitions and weld seams until they were perfectly smooth.

That’s how he moved the assembled keels. The total weight of one keel is approximately 242kg.

Even just after filling and fairing, the keels look great!

And this is what our keels look like after several coats of epoxy. Perfect!

I can’t thank Fabian enough for this work of art!

Published
Categorized as Allgemein