As with the underside of the hull, I first had to laminate fibreglass strips over all the edges. This went much better than on the underside.
This time, I didn’t use woven fibreglass strips (left), but biax fibreglass tape (right). This is easier to drape over the edges. It also makes more sense for reinforcing the edges, because all the fibres go over the edge.
I also used biax fabric instead of woven fibreglass for the deck. I found a 610 gram fabric that allowed me to achieve the required thickness in one go.
As always, I covered everything with a layer of peel-ply at the end.
