Before gluing the frame for the lower hatch, I drilled holes for the screws (with a larger diameter than the screws). I filled these holes with epoxy. When I drill the holes for the screws at the end, once the bulkhead has been covered with fibreglass and painted, the wood in the holes will be protected by the epoxy.
Then I got to work in the fore cabin. After changing the partitioning, I had to repaint the individual compartments. The compartments are now finished and the floor between them has also been painted.
The foundation for the toilet is also there. I had to install it so that the toilet could be mounted horizontally.
Then back to the stern. There I finished the storage lockers. I’m still not a good painter, but I’m getting better with the practice.
