I started with the laminating. There have to be 600gr on the chine, so I used two layers of 300gr glass band (and a layer of peel-ply).
I had to put four layers on the bottom chine.
One side finished, peel-ply removed. Still wet and with peel-ply on the other side.
I did 8 layers of 160gr on the bow (leftovers from a previous project). Had to improvise with the peel-ply, it is less flexible than the glass so I cut small strips to get around the bend.
Reinforcements for rudder and daggerboards on the transom.
And here’s the hull with all the reinforcements.
Now I start preparing the glass for laminating the hull. I have 360gr glass so I need three layers to get the 1000gr required.
